Linux详解

显示二进制文件信息

补充说明

objdump命令 是用查看目标文件或者可执行的目标文件的构成的gcc工具。

选项

--archive-headers 
-a 
显示档案库的成员信息,类似ls -l将lib*.a的信息列出。 

-b bfdname 
--target=bfdname 
指定目标码格式。这不是必须的,objdump能自动识别许多格式,比如: 

objdump -b oasys -m vax -h fu.o 
显示fu.o的头部摘要信息,明确指出该文件是Vax系统下用Oasys编译器生成的目标文件。objdump -i将给出这里可以指定的目标码格式列表。 

-C 
--demangle 
将底层的符号名解码成用户级名字,除了去掉所开头的下划线之外,还使得C++函数名以可理解的方式显示出来。 

--debugging 
-g 
显示调试信息。企图解析保存在文件中的调试信息并以C语言的语法显示出来。仅仅支持某些类型的调试信息。有些其他的格式被readelf -w支持。 

-e 
--debugging-tags 
类似-g选项,但是生成的信息是和ctags工具相兼容的格式。 

--disassemble 
-d 
从objfile中反汇编那些特定指令机器码的section。 

-D 
--disassemble-all 
与 -d 类似,但反汇编所有section. 

--prefix-addresses 
反汇编的时候,显示每一行的完整地址。这是一种比较老的反汇编格式。 

-EB 
-EL 
--endian={big|little} 
指定目标文件的小端。这个项将影响反汇编出来的指令。在反汇编的文件没描述小端信息的时候用。例如S-records. 

-f 
--file-headers 
显示objfile中每个文件的整体头部摘要信息。 

-h 
--section-headers 
--headers 
显示目标文件各个section的头部摘要信息。 

-H 
--help 
简短的帮助信息。 

-i 
--info 
显示对于 -b 或者 -m 选项可用的架构和目标格式列表。 

-j name
--section=name 
仅仅显示指定名称为name的section的信息 

-l
--line-numbers 
用文件名和行号标注相应的目标代码,仅仅和-d、-D或者-r一起使用使用-ld和使用-d的区别不是很大,在源码级调试的时候有用,要求编译时使用了-g之类的调试编译选项。 

-m machine 
--architecture=machine 
指定反汇编目标文件时使用的架构,当待反汇编文件本身没描述架构信息的时候(比如S-records),这个选项很有用。可以用-i选项列出这里能够指定的架构. 

--reloc 
-r 
显示文件的重定位入口。如果和-d或者-D一起使用,重定位部分以反汇编后的格式显示出来。 

--dynamic-reloc 
-R 
显示文件的动态重定位入口,仅仅对于动态目标文件意义,比如某些共享库。 

-s 
--full-contents 
显示指定section的完整内容。默认所有的非空section都会被显示。 

-S 
--source 
尽可能反汇编出源代码,尤其当编译的时候指定了-g这种调试参数时,效果比较明显。隐含了-d参数。 

--show-raw-insn 
反汇编的时候,显示每条汇编指令对应的机器码,如不指定--prefix-addresses,这将是缺省选项。 

--no-show-raw-insn 
反汇编时,不显示汇编指令的机器码,如不指定--prefix-addresses,这将是缺省选项。 

--start-address=address 
从指定地址开始显示数据,该选项影响-d、-r和-s选项的输出。 

--stop-address=address 
显示数据直到指定地址为止,该项影响-d、-r和-s选项的输出。 

-t 
--syms 
显示文件的符号表入口。类似于nm -s提供的信息 

-T 
--dynamic-syms 
显示文件的动态符号表入口,仅仅对动态目标文件意义,比如某些共享库。它显示的信息类似于 nm -D|--dynamic 显示的信息。 

-V 
--version 
版本信息 

--all-headers 
-x 
显示所可用的头信息,包括符号表、重定位入口。-x 等价于-a -f -h -r -t 同时指定。 

-z 
--disassemble-zeroes 
一般反汇编输出将省略大块的零,该选项使得这些零块也被反汇编。 

@file 可以将选项集中到一个文件中,然后使用这个@file选项载入。

实例

首先,在给出后面大部分测试所基于的源代码以及编译指令。 源代码如下: 

root@localhost [test]# nl mytest.cpp 
void printTest() {
    char a;
    a = 'a';
}

void printTest2() {
int a = 2;
a+=2;
} 

对以上源代码进行编译,如下: 

[root@localhost test]# g++ -c -g mytest.cpp 

这里,生成的文件是mytest.o,为了方便测试包含了调试的信息,对可执行文件的测试,显示的结果类似。 

查看当前使用的objdump的版本号: 

[root@localhost test]# objdump -V 
GNU objdump 2.17.50.0.6-14.el5 20061020 
Copyright 2005 free Software Foundation, Inc. 
This program is free software; you may redistribute it under the terms of 
the GNU General Public License.  This program has absolutely no warranty. 

查看档案库文件中的信息: 

[root@localhost test]# objdump -a libmy2.a 
In archive libmy2.a: 
myfile.o:     file format elf32-i386 
rwxrwxrwx 0/0   2724 Nov 16 16:06 2009 myfile.o 
mytest.o:     file format elf32-i386 
rw-r--r-- 0/0    727 Jul 13 15:32 2011 mytest.o 

*这里,libmy2.a是一个使用ar命令将多个.o目标文件打包而生成的静态库。命令的输出类似ar -tv,相比较ar -tv输出如下: **

[root@localhost test]# ar -tv libmy2.a 
rwxrwxrwx 0/0   2724 Nov 16 16:06 2009 myfile.o 
rw-r--r-- 0/0    727 Jul 13 15:32 2011 mytest.o 

显示可用的架构和目标结构列表: 

[root@localhost test]# objdump -i 
BFD header file version 2.17.50.0.6-14.el5 20061020 
elf32-i386 
(header little endian, data little endian) 
  i386 
a.out-i386-linux 
(header little endian, data little endian) 
  i386 
efi-app-ia32 
(header little endian, data little endian) 
  i386 
elf64-x86-64 
(header little endian, data little endian) 
  i386 
elf64-little 
(header little endian, data little endian) 
  i386 
elf64-big 
(header big endian, data big endian) 
  i386 
elf32-little 
(header little endian, data little endian) 
  i386 
elf32-big 
(header big endian, data big endian) 
  i386 
srec 
(header endianness unknown, data endianness unknown) 
  i386 
symbolsrec 
(header endianness unknown, data endianness unknown) 
  i386 
tekhex 
(header endianness unknown, data endianness unknown) 
  i386 
binary 
(header endianness unknown, data endianness unknown) 
  i386 
ihex 
(header endianness unknown, data endianness unknown) 
  i386 
trad-core 
(header endianness unknown, data endianness unknown) 

              elf32-i386 a.out-i386-linux efi-app-ia32 elf64-x86-64 
          i386 elf32-i386 a.out-i386-linux efi-app-ia32 elf64-x86-64 

              elf64-little elf64-big elf32-little elf32-big srec symbolsrec 
          i386 elf64-little elf64-big elf32-little elf32-big srec symbolsrec 

              tekhex binary ihex trad-core 
          i386 tekhex binary ihex --------- 

这里,显示的信息是相对于 -b 或者 -m 选项可用的架构和目标格式列表。 

显示mytest.o文件中的text段的内容: 

[root@localhost test]# objdump --section=.text -s mytest.o 
mytest.o:     file format elf32-i386 
Contents of section .text: 
0000 5589e583 ec10c645 ff61c9c3 5589e583  U......E.a..U... 
0010 ec10c745 fc020000 008345fc 02c9c3    ...E......E.... 

这里注意,不能单独使用-j或者--section,例如objdump --section=.text mytest.o是不会运行成功的。 

反汇编mytest.o中的text段内容,并尽可能用源代码形式表示: 

[root@localhost test]# objdump -j .text -S mytest.o 
mytest.o:     file format elf32-i386 
Disassembly of section .text: 
00000000 <_Z9printTestv>: 
void printTest() 
   0:   55                      push   %ebp 
   1:   89 e5                   mov    %esp,%ebp 
   3:   83 ec 10                sub    $0x10,%esp 
{ 
        char a; 
        a = 'a'; 
   6:   c6 45 ff 61             movb   $0x61,0xffffffff(%ebp) 
} 
   a:   c9                      leave  
   b:   c3                      ret    

000000c <_Z10printTest2v>: 
void printTest2() 
   c:   55                      push   %ebp 
   d:   89 e5                   mov    %esp,%ebp 
   f:   83 ec 10                sub    $0x10,%esp 
{ 
        int a = 2; 
  12:   c7 45 fc 02 00 00 00    movl   $0x2,0xfffffffc(%ebp) 
        a+=2; 
  19:   83 45 fc 02             addl   $0x2,0xfffffffc(%ebp) 
} 
  1d:   c9                      leave  
  1e:   c3                      ret    

这里注意,不能单独使用-j或者--section,例如objdump -j .text mytest.o是不会运行成功的。另外-S命令对于包含调试信息的目标文件,显示的效果比较好,如果编译时没有指定g++的-g选项,那么目标文件就不包含调试信息,那么显示效果就差多了。 

反汇编出mytest.o的源代码: 

[root@localhost test]# objdump -S mytest.o 
mytest.o:     file format elf32-i386 

Disassembly of section .text: 

00000000 <_Z9printTestv>: 
void printTest() 
   0:   55                      push   %ebp 
   1:   89 e5                   mov    %esp,%ebp 
   3:   83 ec 10                sub    $0x10,%esp 
{ 
        char a; 
        a = 'a'; 
   6:   c6 45 ff 61             movb   $0x61,0xffffffff(%ebp) 
} 
   a:   c9                      leave  
   b:   c3                      ret    

0000000c <_Z10printTest2v>: 
void printTest2() 
   c:   55                      push   %ebp 
   d:   89 e5                   mov    %esp,%ebp 
   f:   83 ec 10                sub    $0x10,%esp 
{ 
       int a = 2; 
  12:   c7 45 fc 02 00 00 00    movl   $0x2,0xfffffffc(%ebp) 
        a+=2; 
  19:   83 45 fc 02             addl   $0x2,0xfffffffc(%ebp) 
} 
  1d:   c9                      leave  
  1e:   c3                      ret    

这里,尤其当编译的时候指定了-g这种调试参数时,反汇编的效果比较明显。隐含了-d参数。 

显示文件的符号表入口: 

[root@localhost test]# objdump -t mytest.o 
mytest.o:     file format elf32-i386 

SYMBOL TABLE: 
00000000 l    df *ABS*  00000000 mytest.cpp 
00000000 l    d  .text  00000000 .text 
00000000 l    d  .data  00000000 .data 
00000000 l    d  .bss   00000000 .bss 
00000000 l    d  .debug_abbrev  00000000 .debug_abbrev 
00000000 l    d  .debug_info    00000000 .debug_info 
00000000 l    d  .debug_line    00000000 .debug_line 
00000000 l    d  .debug_frame   00000000 .debug_frame 
00000000 l    d  .debug_loc     00000000 .debug_loc 
00000000 l    d  .debug_pubnames        00000000 .debug_pubnames 
00000000 l    d  .debug_aranges 00000000 .debug_aranges 
00000000 l    d  .note.GNU-stack        00000000 .note.GNU-stack 
00000000 l    d  .comment       00000000 .comment 
00000000 g     F .text  0000000c _Z9printTestv 
00000000         *UND*  00000000 __gxx_personality_v0 
0000000c g     F .text  00000013 _Z10printTest2v 

这里,输出的信息类似nm -s命令的输出,相比较之下,nm命令的输出如下: 

[root@localhost test]# nm -s mytest.o 
0000000c T _Z10printTest2v 
00000000 T _Z9printTestv 
         U __gxx_personality_v0 

显示文件的符号表入口,将底层符号解码并表示成用户级别: 

[root@localhost test]# objdump -t -C mytest.o 
mytest.o:     file format elf32-i386 
SYMBOL TABLE: 
00000000 l    df *ABS*  00000000 mytest.cpp 
00000000 l    d  .text  00000000 .text 
00000000 l    d  .data  00000000 .data 
00000000 l    d  .bss   00000000 .bss 
00000000 l    d  .debug_abbrev  00000000 .debug_abbrev 
00000000 l    d  .debug_info    00000000 .debug_info 
00000000 l    d  .debug_line    00000000 .debug_line 
00000000 l    d  .debug_frame   00000000 .debug_frame 
00000000 l    d  .debug_loc     00000000 .debug_loc 
00000000 l    d  .debug_pubnames        00000000 .debug_pubnames 
00000000 l    d  .debug_aranges 00000000 .debug_aranges 
00000000 l    d  .note.GNU-stack        00000000 .note.GNU-stack 
00000000 l    d  .comment       00000000 .comment 
00000000 g     F .text  0000000c printTest() 
00000000         *UND*  00000000 __gxx_personality_v0 
0000000c g     F .text  00000013 printTest2() 

这里,和没-C相比,printTest2函数可读性增加了。 

反汇编目标文件的特定机器码段: 

[root@localhost test]# objdump -d mytest.o 
mytest.o:     file format elf32-i386 
Disassembly of section .text: 

00000000 <_Z9printTestv>: 
   0:   55                      push   %ebp 
   1:   89 e5                   mov    %esp,%ebp 
   3:   83 ec 10                sub    $0x10,%esp 
   6:   c6 45 ff 61             movb   $0x61,0xffffffff(%ebp) 
   a:   c9                      leave  
  b:   c3                      ret    

0000000c <_Z10printTest2v>: 
   c:   55                      push   %ebp 
   d:   89 e5                   mov    %esp,%ebp 
   f:   83 ec 10                sub    $0x10,%esp 
  12:   c7 45 fc 02 00 00 00    movl   $0x2,0xfffffffc(%ebp) 
  19:   83 45 fc 02             addl   $0x2,0xfffffffc(%ebp) 
  1d:   c9                      leave  
  1e:   c3                      ret    

这里,对text段的内容进行了反汇编。 

反汇编特定段,并将汇编代码对应的文件名称和行号对应上: 

[root@localhost test]# objdump -d -l mytest.o
mytest.o:     file format elf32-i386 
Disassembly of section .text: 

00000000 <_Z9printTestv>: 
_Z9printTestv(): 
/root/test/04_libraryTest/mytest.cpp:1 
   0:   55                      push   %ebp 
   1:   89 e5                   mov    %esp,%ebp 
   3:   83 ec 10                sub    $0x10,%esp 
/root/test/04_libraryTest/mytest.cpp:4 
   6:   c6 45 ff 61             movb   $0x61,0xffffffff(%ebp) 
/root/test/04_libraryTest/mytest.cpp:5 
   a:   c9                      leave  
   b:   c3                      ret    

0000000c <_Z10printTest2v>: 
_Z10printTest2v(): 
/root/test/04_libraryTest/mytest.cpp:6 
   c:   55                      push   %ebp 
   d:   89 e5                   mov    %esp,%ebp 
   f:   83 ec 10                sub    $0x10,%esp 
/root/test/04_libraryTest/mytest.cpp:8 
  12:   c7 45 fc 02 00 00 00    movl   $0x2,0xfffffffc(%ebp) 
/root/test/04_libraryTest/mytest.cpp:9 
  19:   83 45 fc 02             addl   $0x2,0xfffffffc(%ebp) 
/root/test/04_libraryTest/mytest.cpp:10 
  1d:   c9                      leave  
  1e:   c3                      ret    

这里,项"-d"从objfile中反汇编那些特定指令机器码的section,而使用"-l"指定用文件名和行号标注相应的目标代码,仅仅和-d、-D或者-r一起使用,使用-ld和使用-d的区别不是很大,在源码级调试的时候有用,要求编译时使用了-g之类的调试编译选项。 

显示目标文件各个段的头部摘要信息: 

[root@localhost test]# objdump -h mytest.o 
mytest.o:     file format elf32-i386 

Sections: 
Idx Name          Size      VMA       LMA       File off  Algn 
  0 .text         0000001f  00000000  00000000  00000034  2**2 
                  CONTENTS, ALLOC, LOAD, readonly, CODE 
  1 .data         00000000  00000000  00000000  00000054  2**2 
                  CONTENTS, ALLOC, LOAD, DATA 
  2 .bss          00000000  00000000  00000000  00000054  2**2 
                  ALLOC 
  3 .debug_abbrev 00000046  00000000  00000000  00000054  2**0 
                  CONTENTS, READONLY, DEBUGGING 
  4 .debug_info   000000ed  00000000  00000000  0000009a  2**0 
                  CONTENTS, RELOC, READONLY, DEBUGGING 
  5 .debug_line   0000003e  00000000  00000000  00000187  2**0 
                  CONTENTS, RELOC, READONLY, DEBUGGING 
  6 .debug_frame  00000044  00000000  00000000  000001c8  2**2 
                  CONTENTS, RELOC, READONLY, DEBUGGING 
  7 .debug_loc    00000058  00000000  00000000  0000020c  2**0 
                  CONTENTS, READONLY, DEBUGGING 
  8 .debug_pubnames 0000002f  00000000  00000000  00000264  2**0 
                  CONTENTS, RELOC, READONLY, DEBUGGING 
  9 .debug_aranges 00000020  00000000  00000000  00000293  2**0 
                  CONTENTS, RELOC, READONLY, DEBUGGING 
10 .comment      0000002e  00000000  00000000  000002b3  2**0 
                  CONTENTS, READONLY 
11 .note.GNU-stack 00000000  00000000  00000000  000002e1  2**0 
                  CONTENTS, READONLY 

这里,更多的内容参见man objdump中的这个选项。

教程来源于Github,感谢大佬的无私奉献,致敬!

技术教程推荐

从0开始学游戏开发 -〔蔡能〕

白话法律42讲 -〔周甲徳〕

研发效率破局之道 -〔葛俊〕

移动端自动化测试实战 -〔思寒〕

人人都能学会的编程入门课 -〔胡光〕

Kafka核心源码解读 -〔胡夕〕

容量保障核心技术与实战 -〔吴骏龙〕

人人都用得上的数字化思维课 -〔付晓岩〕

快速上手C++数据结构与算法 -〔王健伟〕